Get your first DTF print right.
Start with a small test image. It helps you catch feed, color, and white-ink problems before you use a full sheet.
64-bit Windows
Install BlackBox RIP on a Windows 10 or 11 PC. Check that Windows can see the printer before choosing it in the RIP.
Prepare the artwork
Use an image with a transparent background where the fabric should show. Check small text and fine edges. The supplied Photoshop actions can help prepare the image and generate the white layer.
Pick the right profile
Use the matching Epson model and the ink layout of your conversion. Select sheet or roll feed only if your hardware supports it. Confirm the film size before you print.
Print one small sample
Verify orientation, film side, feed and nozzle health first. Cure and press using the instructions for your film, powder and fabric. Check the result on the intended fabric before repeating the job.